FLASH DUMP ECHOLINK 2000 RF Receiver

26/10/2021Last Updated: 03/11/2022

0 33

ECHOLINK 2000 RF Satellite Receiver

ECHOLINK 2000 RF flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK 2000 RF receiver. The main processor/Micro controller retrieves the information from memory ic when it is power on to know how to work/boot.

If the Flash IC/Memory IC of the ECHOLINK 2000 RF receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver ECHOLINK 2000 RF does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK 2000 RF receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of ECHOLINK 2000 RF is shared for technician/user support.

Information and Specifications of ECHOLINK 2000 RF:

Manufacturer: ECHOLINK
Box Model:2000 RF
Main Board:
Main Controller or Chipset:
Software Version:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Download File Format: ZIP
Download Type: Free

Special Note:

Given ECHOLINK 2000 RF receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.