FLASH DUMP ECHOLINK SN 500 Receiver

27/10/2021Last Updated: 03/11/2022

0 33

ECHOLINK SN 500 Satellite Receiver

ECHOLINK SN 500 flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of ECHOLINK SN 500 receiver. The main processor/Micro controller retrieves the information from memory ic when it is power on to know how to work/boot.

If the Flash IC/Memory IC of the ECHOLINK SN 500 receiver is damaged for SNy reason or its software/firmware malfunctions due to SNy reason then the Main controller does not get SNy boot/basic information SNd the satellite receiver ECHOLINK SN 500 does not turn on. In this situation, we need to reprogram the flash ic of the ECHOLINK SN 500 receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of ECHOLINK SN 500 is shared for techniciSN/user support.

Information SNd Specifications of ECHOLINK SN 500:

MSNufacturer: ECHOLINK
Box Model: SN 500
Main Board:
Main Controller or Chipset:
Software Version:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Download File Format: ZIP
Download Type: Free

Special Note:

Given ECHOLINK SN 500 receiver software is a backup dump flash file that cSN be loaded by a Programmer or with a Loader tool in the dead receiver or cSN be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for SNy type of damage/loss because of uploading/downloading the software.