GEOSAT JASPER Satellite Receiver
GEOSAT JASPER flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of GEOSAT JASPER receiver. The main processor/Micro controller retrieves the information from memory ic when it is power on to know how to work/boot.
If the Flash IC/Memory IC of the GEOSAT JASPER receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver GEOSAT JASPER does not turn on. In this situation, we need to reprogram the flash ic of the GEOSAT JASPER receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of GEOSAT JASPER is shared for technician/user support.
Information and Specifications of GEOSAT JASPER:
- Manufacturer: GEOSAT
- Box Model: JASPER
- Main Board: ALI3510C_HW102.02.033_V5312
- Main Controller or Chipset:
- Software Version:
- Box Type: Digital Full HD
- Flash Type: SPI SOP8/SOIC8
- Flash Memory: GD25Q32B
- Flash Size: 4 Mb
- Software Type: Backup Dump
- Download File Format: ZIP
- Download Type: Free
Special Note:
Given GEOSAT JASPER receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.
GEOSAT JASPER dump file free download.
FOR MORE FLASH DUMP RECEIVERS CLICK HERE