REDLINE G30 Satellite Receiver FLASH DUMP

07/04/2022Last Updated: 13/08/2022

0 54

REDLINE G30 Satellite Receiver

REDLINE G30 flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of REDLINE G30 receiver. The main processor/Micro controller retrieves the information from memory ic when it is power on to know how to work/boot.

If the Flash IC/Memory IC of the REDLINE G30 receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver REDLINE G30 does not turn on. In this situation, we need to reprogram the flash ic of the REDLINE G30 receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of REDLINE G30 is shared for technician/user support.

Information and Specifications of REDLINE G30:

Manufacturer: REDLINE
Box Model: G30
Main Board:
Main Controller or Chipset:
Software Version:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Download File Format: ZIP
Download Type: Free

Special Note:

Given REDLINE G30 receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.