CV338H-A42 Software Free Download

  • SONY KDL-32X1000 SOFTWARE FREE DOWNLOAD

    SONY KDL-32X1000 LED TV

    SONY KDL-32X1000 firmware file is shared for repairing purpose in case when the smart LED TV is stuck on Logo or in Boot Loop Condition. If the SONY KDL-32X1000 LED TV does not turn on mean not leaving the standby position or the remote control is not responding and even the control buttons/keys on LED TV not working then it means not a software/firmware problem and in this situation check the hardware.

    Troubleshooting Guide:

    If the SONY KDL-32X1000 LED TV is dead. Mean no power no flash light or indicator then first check the physical damage/burnt area, short circuit then power supply. In start check the fuse of main input if available then also check the power cable/wire continuity because in case of short circuit mostly the fuse burnt and cut off the supply.

    SONY KDL-32X1000

    If both are found ok and SONY KDL-32X1000 LED TV is still dead then check the primary power circuit if found ok then test the secondary power circuit. In this case if fault diagnose in power supply and can be repaired then no need to load firmware file the TV will be normal after repairing and if the standby light is indicating and the TV is still stuck on logo or welcome screen or not responding remote and also all the primary and secondary voltage of the main board of the SONY KDL-32X1000 LED TV are tested and found accurate then it may be the RAM/ROM issue also. In this case try to load firmware/software by USB boot. If not succeed then JTAG with programmer and try to erase and write memory otherwise replace memory chip.

    Installation Instructions:

    Before writing firmware file in SONY KDL-32X1000 LED TV board, first of all try to Hard Reset the led TV by different techniques and methods described in the post. Also try recovery file to recover original firmware back to normal. After successfully installing firmware in SONY KDL-32X1000 LED TV do factory default reset before using. In some cases the firmware file match with the board but the screen panel setting is out. for this enter to service menu and adjust the screen parameters. And for the remote control that may not match, so in such cases use universal remote control.

    Technical Specifications of SONY KDL-32X1000:
    • Make/Brand: SONY
    • Main Board/Chassis: CV338H-A42
    • Board Type: COMBO
    • Power Source: AC220
    • Rated Power Consumption:
    • Panel Info: HD
    • T-Con: NA
    • Screen Resolution: 1366X768
    • Backlight Parameters:
    • Main Processor/Chipset: MSD338
    • CPU/MCU:
    • GPU:
    • RAM: 512 MB
    • ROM: 4 GB
    • SPI Flash: NA
    • OS Type: Android
    • Android Version: 4.4
    • Default Language: English-US
    • Region/Country: India/Pakistan
    • Supported Languages:
    • Remote IR: Sony
    • Firmware Name: CtvUpgrade.bin
    • Firmware Type: USB UPDATE
    • Firmware Version:
    • Firmware Reference:
    • Firmware Build:
    • Product User: SONY MALAYSIAN
    • Product Model: KDL-32X1000
    • Build.Prop: Yes
    • Display Logo: BLUE & SONY UPDATE
    • File Size: 300 MB
    • Tuner Info:
    • Factory Code: Menu 1147
    Special Note:

    The attached firmware is USB boot and can be loaded by USB disk in case when LED TV stuck on Logo or Boot Screen. Not for Update purpose if LED TV is working Normal. Always check Mainboard and RAM/ROM before loading any Firmware file. In case of wrong file loaded, as a result, board may be dead. Admin Team is not responsible in case of any damage/loss.

    Click Here For More Smart LED TV Software/Firmware

    About Mainboard:

    CV338H-A42 is the smart android platform FHD LED TV Board which has supported screen resolution of 1920X1080. CV338H-A42 firmware file is compatible with this board. The CV338H-A42 is a universal board and compatible with many screen panels. you can make smart android LED TV with this board and by USB upgrade firmware. All visitors can download CV338H-A42 firmware free from the given download links and if someone wants to download from direct single file instead parts then he can download via Premium download link given below in the end.

    CV338H-A42

    About Firmware:

    This software file is compatible with SONY KDL-32X1000 LED TV. USB Disk must be formatted with FAT32 system. Mostly new FAT 32 devices are not supported for USB Boot so, make sure that USB disk is compatible. Transfer the given software file into USB disk and plug in into USB port of SONY KDL-32X1000 LED TV Mainboard and switch on. It will flash automatically. After Completion remove the USB disk and power on the TV. Hope TV will be normal now. If you have any problem by installing software then Read Here.

    How to Download:

    1. Click on the file part or Download Link, New Tab will open
    2. Click on Free Download or Premium Download as per your account type
    3. Check I’m not robot and wait for countdown timer to end
    3. Click on Create Download Link
    4. Ignore Popups and wait for Preparing Download Link
    5. Click on Click Here To Download. Done

    Total Parts:

    Note: Download all parts then extract/unzip any one of them. If you face any issue, use 7zip to extract files.

    Firmware Info and Free Download Links:
error: Content is protected !!

Adblock Detected

Please consider supporting us by disabling your ad blocker