DALY STAR 9300 SOFTWER

  • FLASH DUMP DALY STAR 9300 Receiver

    DALY STAR 9300 Satellite Receiver

    DALY STAR 9300 flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of DALY STAR 9300 receiver. The main processor/Micro controller retrieves the information from memory ic when it is power on to know how to work/boot.

    DALY STAR 9300

    If the Flash IC/Memory IC of the DALY STAR 9300 receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver DALY STAR 9300 does not turn on. In this situation, we need to reprogram the flash ic of the DALY STAR 9300 receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of DALY STAR 9300 is shared for technician/user support.

    Information and Specifications of DALY STAR 9300:

    • Manufacturer: DALY
    • Box Model: STAR 9300
    • Main Board: E_M3329_HM11A_V1.0
    • Main Controller or Chipset:
    • Software Version:
    • Box Type: Digital Full HD
    • Flash Type: SPI SOP8/SOIC8
    • Flash Memory: GD25Q32B
    • Flash Size: 4 Mb
    • Software Type: Backup Dump
    • Download File Format: ZIP
    • Download Type: Free

    Special Note:

    Given DALY STAR 9300 receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.

    Download

    DALY STAR 9300 dump file free download.

    FOR MORE FLASH DUMP RECEIVERS CLICK HERE

error: Content is protected !!

Adblock Detected

Please Close Ad Blocker and Refresh The Page Download Start Automaticly