TABSAT 100 S ORIGINAL Satellite Receiver

TABSAT 100 S ORIGINAL flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of TABSAT 100 S ORIGINAL receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot. If the Flash IC/Memory IC of the TABSAT 100 S ORIGINAL receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver TABSAT 100 S ORIGINAL does not turn on. In this situation, we need to reprogram the flash ic of the TABSAT 100 S ORIGINAL receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of TABSAT 100 S ORIGINAL is shared for technician/user support.

Information and Specifications of TABSAT 100 S ORIGINAL:

  • Manufacturer: TABSAT
  • Box Model: 100 S ORIGINAL
  • Main Board:
  • Main Controller or Chipset:
  • Software Version:
  • Box Type: Digital Full HD
  • Flash Type: SPI SOP8/SOIC8
  • Flash Memory: GD25Q32B
  • Flash Size: 4 Mb
  • Software Type: Backup Dump
  • Download File Format: ZIP
  • Download Type: Free

Special Note:

Given TABSAT 100 S ORIGINAL receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.

Here is the download link of the TABSAT 100 S ORIGINAL dump file free download.


Related Articles

Leave a Reply

Your email address will not be published.

error: Content is protected !!

Adblock Detected

Please consider supporting us by disabling your ad blocker