FLASH DUMP SATLINK WS-6951 Receiver

13/01/2022Last Updated: 05/10/2022

0 259

SATLINK WS-6951 Satellite Receiver

SATLINK WS-6951 flash dump file or the flash file is a boot information data with software/program of a satellite receiver, which is located at EEPROM, or Flash IC or Memory IC of SATLINK WS-6951 receiver. The main processor/Microcontroller retrieves the information from memory ic when it is power on to know how to work/boot.

If the Flash IC/Memory IC of the SATLINK WS-6951 receiver is damaged for any reason or its software/firmware malfunctions due to any reason then the Main controller does not get any boot/basic information and the satellite receiver SATLINK WS-6951 does not turn on. In this situation, we need to reprogram the flash ic of the SATLINK WS-6951 receiver with the matched hardware flash dump file to get the receiver in normal condition. A flash dump file of SATLINK WS-6951 is shared for technician/user support.

Information and Specifications of SATLINK WS-6951:

Manufacturer: SATLINK
Box Model: WS-6951
Main Board:
Main Controller or Chipset:
Software Version:
Box Type: Digital Full HD
Flash Type: SPI SOP8/SOIC8
Flash Memory: GD25Q32B
Flash Size: 4 Mb
Software Type: Backup Dump
Download File Format: ZIP
Download Type: Free

Special Note:

Given SATLINK WS-6951 receiver software is a backup dump flash file that can be loaded by a Programmer or with a Loader tool in the dead receiver or can be upgraded/downgraded in the working receiver by the USB Upgrade method or with STB Upgrade Tool. Flash Dump Files Team is not responsible for any type of damage/loss because of uploading/downloading the software.